|
|
|
|
|
Useful helps
|
|
Impregnation Supreme NS (nanotechnology)
|
 |
Protects brick facade (as well as other mineral surfaces) against dirt, soaking with water, provides with self-cleaning ability. High resistance against climate influences. The application is transparent and indistinguishable by eye.
|
 |
Used for jointing of brick facing tiles. In this case, we prepare drier jointing material to prevent contamination of the jointing surface.
|
 |
Flexible mortar for sticking of brick tiles, natural, stone and ceramic tiles, for sticking and adjustment of the weatherization system with brick and ceramic tiles.
|
 |
One-component 100% silicone mastic for vertical and horizontal pointing of expansion and other joints in facing brickwork, setting through air humidity. The mastic is applied using a gun on a degreased surface free from gross dirt. Protect the joint sides with a masking tape for perfect application.
|
|
Concentrated product against fungi and moulds to clean and protect building elements. Atlas MYKOS is mainly recommended for building elements susceptible to intensive dampness effects in interiors and exteriors. The concentrate is to be diluted before use with fresh drinking water in the proportion of 1 portion of MYKOS : 5 portions of water. Average consumption: 60 g of concentrate per m2.
More information...
|
|
Water-repellent silicone product used to protect such building elements as brick and lime-sand walls, concrete structures and plasters. The solution penetrates deep into materials, giving them a high level of vapour permeability. Atlas SILSTOP is a ready-made transparent solution for direct use in interiors and exteriors. The solution should neither be diluted nor thickened. Average consumption: 0.2 l / m2.
More information...
|
|
Liquid cleaning agent used to remove lime sediments and light dirt from brick and concrete surfaces in interiors and exteriors. Contains no solving agents or hydrochloric acid. Removes mortar remainders, laitance and light soiling safely and easily from ceramic materials as wall and floor tiles, mosaics, porphyry, etc. KSE is used undiluted.
|
|
ZSE - cement laitance remover
|
|
Special cleaning agent for facades and floors, free from salts and sulphuric acid. Cleans safely and protects subsequently the base. Also effective on lime coats, soot and rust, as well as atmospheric dirt. Suitable for exteriors and interiors. ZSE is applied as is or diluted with water in maximum proportion 1:5.
More information...
|
|
To be inserted into the vent holes in the bottom brick courses to prevent insects and small rodents from getting into the sandwich brickwork structure.
|
|
|
Used to fill expansion joints to prevent the penetration of dampness, wind and dust. It must resist the stress caused by the thermal expansiveness of building elements.
Ethafoam was developed for this purpose to serve as ideal cold-applied packing.
|
|
An invaluable help in pointing tiling blocks, bricks, artificial and natural stone, etc.
|
|
Used for reinforcement where joints are loaded in bending or tension. It is also used at wall connection points as corner reinforcement and over lintels. It prevents the occurrence of cracks in facing brickwork joints.
|
 |
|
It is used as an adhesive bridge for wooden surfaces or on bases with very high absorbability used to apply facing tiles.
It is suitable for both exteriors and interiors.
|
|
Screed damp-proofing FDS 2K
|
|
Prevents water from penetrating into structures exposed to weather. It is only applied in the top joints of posts, garden walls, chimneys...
FDS 2K application prevents the occurrence of undesirable laitance on drying surfaces.
|
|
|
|
